Remove the four filters from the holder; Using a straight screwdriver, press the plastic joint and lift the
hose until the joint is completely separated.
The filters must be arranged in order as shown above (step 1).
1.
PP
2.
CTO
3.
UF
4.
GAC
ATTENTION:
Please install the filters in the order of the respective filter number.
Please wash / rinse the filters according to the installation steps, in the order of installation and install the
filters according to the numbers corresponding to the filters.
NOTE - The filter used cannot be reused!
Replacement of filter elements
- Remove the blue clip, hold it in the same position with the clip removed, and immediately pull the tube
to remove the filter element.
6.5. Installation diagram
8
