Zass ZGS 04, Руководство по эксплуатации

Страница: 4 / 12

3. PRODUCT INSTALLATION
4
1. Pour water into water tank
Press the button above the water tank and water tank will pop out. Then pull the
stopper and pour water into tank, but please don’t add to more than the highest water
level (see picture 1-2).
2. Install the accessories
When you need, hold the Machine handle, with the other hand install fur brush to iron
head, and installed correctly (see picture 3).
3. Using
After the completion of adding water, plug in power, and turn on the power button, the
Indicator light is red and start to blink slowly, wait for about 30 s, the indicator light
stop to blink, the preheating is finished, the machine is ready for use. Press the power
button again to choose the first steam level. Then press the steam switch to use it.
Press the power button again, product goes to second steam level, and you can
choose the steam levels by pressing power button.
REMARK: There is a lock design in steam switch. Slide down the switch to get product
outlet steam continuously.
4. After using
when finish ironing, press the power button 2 seconds, then power indicator light turns
off, then pull out the plug, keep the product cool down then store it in a dry place,
where kids will not touch.
5. Lack water protection
When there is no enough water inside the tank, the pump will make a continuous
sound, and after 45 seconds, the pump stops working and product goes to standby
condition. The red indicator light blinks fast. Then press the power “ ” to shut off the
product. If you want to use it again, just press the power “ ” to restart.
6. Auto-shut off
When leaving product which is turning on for over 8mins and not touching it, it will go
to standby condition automatically, indicator light blinks fast. Press the power “ ” to
shut off the product. If you want to use it again, just press the power “ ” to restart.
2. KEY TO MACHINE PARTS (Page 2)
1
2
3 9
4 10
11 5
6
7
8
- Water tank;
- Button of water tank;
- Steam switch; - Handle;
- Iron head; - Cord protector;
- Accessory for brush; - Power indicator light;
- Steam adjusting;
- Indicator light;
- On/Off button;