Getting Started
Install & Remove the Battery
Place the battery at the back of radio and slide battery closed until the latch clicks.
To remove the battery, press down the PUSH lever in and slide the battery off.
Install & Remove the Antenna
Connect the rubber antenna to the top antenna socket by
inserting the plug and turning in a clockwise direction.
Make sure that the antenna is fully connected until tight.
Note that the radio requires the antenna to function.
Do not transmit without an antenna connected as this
could damage the radio.
Install & Remove the headset / programming
cable
Open the side headset speaker / mic port cover and
then plug in the accessory firmly into the side jack.
If you want to remove the accessory, unplug it gently
and close the cover.
Install & Remove the belt clip
Align holes of belt clip with holes at back of radio and
attach both supplied screws. Unscrew to remove.
