background image

Important Safety Information

Warning
For your safety, please read all the safety 

instructions in this Manual before using the 

ZARGES Telescopic Loftmaster.

Safety and quality is of paramount 
importance when manufacturing your 
Telescopic Loftmaster products. 
All components meet the requirements of 
the Work at Height Regulations of 2005.

Important!

Read these instructions before installing the 
ZARGES Telescopic Loftmaster.

Install the Telescopic Loftmaster according the 
instructions given in this Manual and on the 
labels affixed to the equipment.

Safety Considerations
General

 

• Do not install or use the ZARGES 

 

  Telescopic Loftmaster if damaged in  

  

any 

way.

 

• Never exceed the maximum load of 

  

150 

kg.

 

• Never operate any of the red buttons  

 

  while on the ladder or allow anyone  

 

  else to operate the buttons while it is in  

  

use.

Cleaning

 

• Do not use any abrasive or chemical  

  

solvents.

 

• Periodically clean with a soft damp   

 

  cloth. We recommend occasionally   

 

  spraying with a silicon spray.

How to Dispose of this Product

When the unit has reached the end of its life, 
contact your local council regarding
available recycling or disposal options.

Servicing and spare parts

A full set of spares are available. Please visit 
our website at www.zarges.com/uk for 
further details for servicing and spare parts.

For more information visit: zarges.com/uk

3

Содержание 101482

















Отзывы: