Installation
4
5
Installation
Installation
Installation
AC CHARGER
INTELLIGIZER FENCE MONITOR
ENVIRONMENTAL FACTORS WILL IMPACT
CELLULAR RECEPTION. NOT RECOMMENDED IN
AREAS OR BUILDINGS WHERE CELLULAR
RECEPTION IS POOR.
HOT WIRE
GROUND
FENCE
SENSOR
CABLE
AC CHARGER
6’
10’
10’
POWER
SOURCE
1
2
4
3
Install Intelligizer Fence Monitor next to
your existing AC fence charger* in a clean,
sheltered location. Unplug your AC charger.
Install the fence sensor cables on the Ground
and Fence terminals of your AC charger.
Intertwine the fence sensor wire ends around
your existing fence and ground wires. It
does not matter which color is connected
to either terminal.
*Any AC fence controller currently listed by UL for Woodstream
Corp. Visit www.zarebasystems.com/intelligizer for more info.
Questions? Call 855-592-7322
View Installation video online:
www.zarebasystems.com/intelligizer
1
2
3
4
5
Plug AC charger into the switching power
plug of the Intelligizer Fence Monitor, and
then plug the power plug of the Intelligizer
Fence Monitor into your power outlet.
IMPORTANT – The first time you plug the
Intelligizer in, your fence will be set to OFF
until you activate your unit and send the
first ON command from your cell.
Activate your Intelligizer Fence Monitor
online at:
www.IntelligizerAccount.com
Activation setup steps are listed on Page 6.