©2014-2016 ZappBug. All rights reserved. Product specifications subject to change.
6
Warning: Extension Cords
Some extension cords are not adequate to carry the load of current drawn by
this heater without becoming dangerously overheated. If an extension cord
must
be used, do not use a cord set rated less than
1500 watts
or
15 amps
, and
of a minimum size of 16 Gauge. Use only an extension cord with the UL seal. Use
of an inadequate extension cord may result in overheating of the extension
cord or fire.
Warning: Old Electrical Wiring and Outlets
Each ZappBug thermal unit will draw 12-15 amps of current (1500 Watts) and
must be run on circuits rated
15 amps and above
only. Some old electrical
wiring and outlets may not be capable of sustaining these loads. If you are
unsure of the electrical wiring or outlets in your location, contact an electrician
before operating ZappBug or any other high-current products. If electrical
cord(s) appears deformed or feel hot to the touch, unplug immediately and
contact ZappBug customer service. Old or faulty electrical wiring could lead to
damage, dangerous fire and injury.
Additional Warnings
•
Failure to comply with the Warnings presented by this manual may result in
severe injury and/or damage to property.
•
Incorrect assembly or improper use may result in hazardous conditions.
Only assemble according to instructions in this manual.
•
Do not block air intake or exhaust vents on heater. Obstructions of the
intake or exhaust vents can cause the heater to overheat.
•
Do not use outdoors or in a wet environment. This product is designed for
indoor use only.
•
Do not block exhaust vents. This can cause damage to the
heaters.
•
Do not reach into or insert objects into ventillation fan while running. This
may result in injury or damage.
•
Do not place flammable objects or aerosols inside the ZappBug Room
TM
.
•
Some items may be damaged during heat treatment. Use Caution when
heat treating fragile items such as antique books, items made of wood,
vinyl records and other belongings.
•
Consult the manufacturer of items in question (such as electronics) for
a maximum safe temperature before placing them in the ZappBug Room.
Always monitor temperature to ensure that temperature never exceeds
safe level.
