Zapi COMBI ACE0, Руководство пользователя

Страница: 60 / 79

Page - 60/79 AF6ZP0AL - COMBIAC0 & ACE0 - User Manual
Error code Description Effect
Machine status
when the test is
done
Restart
procedure
Smart driver
KO - MDI
CAN 68
Smart driver is open, not able to provide EB
positive valve, pump, traction
stopped, Lc opened
start-up Key re-cycle
Key-off
shorted -
MDI CAN 76
Key-off signal is low at Key-on
valve, pump, traction
stopped, Lc opened
start-up Key re-cycle
Evp1 not ok -
MDI CAN 48 Evp driver is failed shorted (always ON)
mismatch between the valve set-point and
its feedback valve, pump, traction
stopped, Lc opened,
Eb applied start-up, stby valve or pump
or traction
request
Evp2 not ok -
MDI CAN 47 Evp2 driver is failed shorted (always ON)
mismatch between the valve set-point and
its feedback valve, pump, traction
stopped, Lc opened,
Eb applied start-up, stby valve or pump
or traction
request
Pump Vmn
Low - MDI
CAN 28 Pump motor output is too low, with respect
to pwm applied valve, pump, traction
stopped, Lc opened,
Eb applied start-up, stby,
during pump
function valve or pump
or traction
request
Pump Vmn
High - MDI
CAN 29 Pump motor output is too high, with respect
to pwm applied valve, pump, traction
stopped, Lc opened,
Eb applied during pump
function valve or pump
or traction
request
Wrong Zero -
MDI CAN
code alarm
53 The outputs of the amplifiers (used to
measure the motor voltage) are cheked this
alarm occurs when voltage signals >3V or
<2V at the init valve, pump, traction
stopped, Lc opened,
Eb applied init valve or pump
or traction
request
Evp1 coil
open - MDI
CAN 50 The Evp1 coil is not connected between
Paux and NEVP1 output, and the parameter
EVP TYPE in the set-option menu is set
Analog or Digital valve, pump, traction
stopped, Lc opened,
Eb applied start-up, stby,
traction valve or pump
or traction
request
Evp2 coil
open - MDI
CAN 51 The Evp2 coil is not connected between
Paux and NEVP2 output, and the parameter
EVP TYPE in the set-option menu is set
Analog or Digital valve, pump, traction
stopped, Lc opened,
Eb applied start-up, stby,
traction valve or pump
or traction
request
Aux Batt.
Short - MDI
CAN code
alarm 74 When the positive of the AUX OUTPUT is
driven by the tiller, the positive is high and
the tiller is released. valve, pump, traction
stopped, Lc opened,
Eb applied start-up, stby
Emergency -
MDI CAN
code alarm
80 The PAUX connector (A3) is not connected
to the battery or the voltage is different. valve, pump, traction
stopped, Lc opened,
Eb applied continuous
Flash
Checksum -
MDI CAN 08 The software is corrupted or the flash on the
inverter is damaged. valve, pump, traction
stopped, Lc opened,
Eb applied continuous
Current
Sens. KO -
MDI CAN 26 The current sensor is damaged. valve, pump, traction
stopped, Lc opened,
Eb applied continuous
Phase KO -
MDI CAN 27 One of the motor phases is open valve, pump, traction
stopped, Lc opened,
Eb applied continuous