Important Notes
1. Regularly perform a routine maintenance check. Doing so will
help protect yourself and your vehicle.
2. If any parts are damaged, whether normal or abnormal, please
check with the dealer before riding.
1. Mirrors need to be attached to the handle bars between the grips
and the brake handle.
2. Screw in the mirror clockwise. The mirror that goes on the left side
is curved to the left and the mirror that goes on the right side curves to
the right.
3. Secure mirrors by tightening the bolts.
4. Clean and adjust both mirrors before you ride. Adjust each mirror
so you can see the lane behind you and as far as possible the lane
next to you. When the mirror is properly adjusted you can see the
edge of your arm and shoulder.
Point Inspection before every use
Item
Action
Front Brake
Squeeze right hand brake and push the vehicle to
see whether it rolls easily. If it does, then the brake
must be tightened. Tighten the bolt until the vehicle
will no longer move with the brakes applied.
Rear Power/Disc Brake
Listen for any noticeable grinding or squealing from
the tires while the brake is applied. If so, contact
the dealer to adjust.
Brake Fluid
Check fluid gauge on the left handlebar to ensure
that the brake fluid is above the indicated level. If
not, top it up with a good brand of brake fluid.
Electric Switch Handle
Turn THrottle counter clockwise then release; the
Throttle should spring back to stop position. If not,
contact your supplier.
Tires
Check the tire pressure is 36 PSI
Controller/ Motor
Check the usage and condition
Battery
Check the power level by looking at the gauge or
with a voltage meter.
Signal
Check to make sure your lights are working.
Nuts and Bolts
Check to make sure that all nuts and bolts are
tightened and secured.
Speed Switch
Normal Moped operation is DOWN
Installing the mirrors
4
