Zap LINN LOW DRESSER, Инструкция по сборке

Страница: 4 / 9

- 2 -
Attach one Middle Panel (F) to the Bottom Rails
using 2 Screws (#2)
Determine the top and bottom of the Middle
Rails (C). The top will have a countersunk pilot
hole in the center and the bottom will have 2
outer countersunk pilot holes
NOTE: Ensure that the back metal
plates on the Middle Panel face the
same way as the back metal plates
on the rear side of the Side Panels.
Attach 2 Middle Rails (C) to the Middle Panel
using 2 Screws (#1)
NOTE: Ensure that the outer countersunk pilot
holes on the Rails are facing the floor
STEP 3
STEP 4 STEP 5