Attention
1. Power supply: AC100V
-
240V,50/60Hz
2. Service Environment: 0-40
℃
3. Unplug the power plug before cleaning, wipe the dust on surface with slight wet
dishcloth when cleaning, be careful not to let the drops into the internal parts, not loose
the connector.
4. The electric box contains electronic components, metals, plastics, wires etc., so
dispose of it in accordance with each country's environmental legislation, not the
general household waste.
5. Check carefully to ensure correct and complete assembly before using.
6. Be familiar with all functions and program settings of the product before first use.
7. Children are forbidden to play on the product because of unforeseen action when
playing, so any dangerous consequences caused by this improper action will not be on
manufacturers.
8. Slight noise caused by the V-ribbed belt or brake system due to structure will not
have any effect on the use of the equipment.
9. Corrosive or abrasive materials are forbidden to clean the equipment. Must ensure
that the cleaner used will not pollute the environment.
10. This appliance can be used by children aged from 8 years and above and persons
with reduced physical, sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved. Children shall not play
with the appliance.
11. Cleaning and user maintenance shall not be made by children without supervision.
12. If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or a similarly qualified person in order to avoid a hazard.
13. Please make sure there is no hazard sources in your operating environment. e.g.,
do not litter the tools around. Always be careful to treat the packaging materials in order
to avoid any possible danger, e.g. plastic bag may lead to choking hazard to children.
14. Keep the original package of the equipment if necessary in case of the future use in
transportation.
Waste disposal
This marking indicates that this product should not be disposed with other household
wastes. To prevent possible harm to the environment or human health from uncontrolled
waste disposal, recycle it responsibly to promote the sustainable reuse of material
resources. To return your used device, please use the return and collection systems or
contact the retailer where the product was purchased. They can take this product for
environmental safe recycling.
Common fault treatment
The following tips will help you detected and eliminate the common
fault and error. If the error you meet is not on the list, please contact
our customer service.
Error
Method
No response while pressing
The desktop moving towards
the opposite direction as ordered
Rising in a low speed
The desk moving downwards
without any operation
Automatically Self-Reset
Overload Operation
Can’t reach the min or max height
Check if all the cables well connected;
Reset;
Check if overloaded, max loading: 70kg;
Check if overloaded, max loading: 70kg;
Check whether the power wire is still well
connected;
Restart after suspend for 18mins while
connecting with power;
Reset;
1.Botton introduction: There are two buttons that "▲" , "▼".
(1) "▲" : Adjust the desk upwards;
(2) "▼" : Adjust the desk downwards;
●
Reset
a. When the desk is at the lowest position, long press the "▼“ button for
5 seconds to enter the reset mode, the reset will be completed until the
lifting system reached bottoms then rebounds to stop.
b. When the lifting system fails, release the button, long press the "▼“
button, the reset will be completed until the lifting system reached
bottoms then rebounds to stop.
●
Lifting
a. Press "▲”or “▼”button to adjust the height of the desk.
b. Hold "▲”or “▼”button for more than 1.2 seconds to enter automatic
lifting mode, then press any button to stop lifting ( this function is optional,
the default software does not have this function).
●
Troubleshooting
If there is no response after pressing the "▲”or “▼” button after working
for a period of time, please rest for more than 18 minutes before using it
again.
