background image

2

About Installation, Cleaning
and Maintenance

• It is mandatory that all operations required for the

installation are carried out by a qualified or competent
person, in accordance with existing rules and regulations.

• Disconnect the appliance from the electrical supply,

before carrying out any cleaning or manteinance work.

• Ensure a good ventilation around the appliance. A poor

air supply could cause lack of oxygen.

• Ensure that the gas supply complies with the gas type

stated on the identification label, placed near the gas
supply pipe.

Using a gas cooking appliance will produce heat
and moisture in the room which it has been
installed in. Ensure a continuous air supply, keeping
the air vents in good conditions or installing a
cooker hood with discharge tube.

In case of intensive or long time use of the appliance,
make the ventilation more efficient, by opening a
window or increasing the electric exhaust fan
power.

• Once you removed all packaging from the appliance,

ensure that it is not damaged and the electric cable is
in perfect conditions. Otherwise, contact your dealer
before proceeding with the installation.

• The manufacturer disclaims any responsability

should all the safety measures not be carried out.

• Under no circumstances should you attempt to repair

the appliance yourself. Repairs carried out by
unexperienced persons may cause injury or serious
malfunctioning. Refer to your local Service Centre.
Always insist on genuine spare parts.

During Operation

• It is most important that this instruction book should be

retained with the appliance for future reference. Should
the appliance be sold or transferred, always ensure that
the book is left with the appliance in order that the new
owner can get to know the functions of the appliance and
the relevant warnings.

• This appliance  has been designed for non professional

purpose in private houses only. It is meant to cook edible
foodstuff only and 

MUST

 

NOT

 be used for any other

purposes.

• It is 

dangerous 

to alter the specification in any way.

• For hygiene and safety reasons, this appliance should

be kept clean at all times. A build-up of fats or other
foodstuff could result in a fire.

• Under no circumstances should you attempt to repair

the appliance yourself. Repairs carried out by
unexperienced persons may cause injury or serious
malfunctioning. Refer to your local  Service Centre.
Always insist on genuine  spare parts.

• Ensure that all control knobs are in the OFF position

when not in use.

• Should you connect any electrical tool to a plug near this

These warnings are provided in the interest of safety. You 

MUST

 read them carefully before

installing or using the appliance.

 Important Safety Information

cooking appliance, ensure that electric cables are not
in contact with it and keep them far enough from the
heated parts of this appliance.

If the appliance is out of order, disconnect it from the
electric supply.

Child Safety

• This appliance has been designed to be operated by

adults and children under supervision. Young children

MUST

 

NOT

 be allowed to tamper with the controls or play

near or with the oven.

• Accessible parts of this appliance may become hot

when it is in use. Children should be 

KEPT

 

AWAY

 until it has

cooled.

This appliance is not intended for use by children or
other persons whose physical, sensory or mental
capabilities or lack of experience and knowledge
prevents them from using the appliance safely
without supervision or instruction by a responsible
person to ensure that they can use the appliance
safely.

 Environmental Information

• After installation, please dispose of the packaging with

due regard to safety and the environment.

• When disposing of an old appliance, make it unusable,

by cutting off the cable.

The following symbols will be found in the text to
guide you throughout the Instructions:

Safety Instructions

Step by step instructions for an operation

Hints and Tips

Environmental information

Guide to Use the instructions

The symbol 

on the product or on its packaging

indicates that this product may not be treated as household
waste. Instead it shall be handed over to the applicable
collection point for the recycling of electrical and electronic
equipment. By ensuring this product is disposed of correctly,
you will help prevent potential negative consequences for
the environment and human health, which could otherwise
be caused by inappropriate waste handling of this product.
For more detailed information about recycling of this
product, please contact your local city office, your household
waste disposal service or the shop where you purchased
the product.

These instructions are only for the countries
stated by the symbol printed on the front cover
of this instruction book.

Содержание ZXS 646 IT

















Отзывы: