Zanussi ZXAN9FW0, Руководство пользователя

Страница: 9 / 20

bearing.
5. Fit the freezer compartment door and close
them.
6. Fix the installation button to the door lower
bearing. Press the installation button until there
is no gap between it and cavity, then fix the
screw.
7. Take out hole covers from a bag and put them
in the holes left after the door hinge.
OPERATION
SWITCHING ON
1. Insert the plug into the wall socket.
2. Turn the temperature regulator clockwise to a
medium setting.
SWITCHING OFF
To turn off the appliance, turn the temperature
regulator to the "0" position.
You can also unplug the appliance.
TEMPERATURE REGULATION
The temperature is regulated automatically.
However, you can set a temperature inside the
appliance yourself.
Choose the setting keeping in mind that the
temperature inside the appliance depends on:
• room temperature,
• frequency of opening the door,
• quantity of food stored,
• appliance location.
A medium setting is generally the most suitable
one.
To operate the appliance:
1. Turn the temperature regulator clockwise to
obtain a lower temperature inside the
appliance.
2. Turn the temperature regulator
counterclockwise to obtain a higher
temperature inside the appliance.
Setting "0" means that the appliance is switched
off.
DAILY USE
CAUTION! This refrigerating
appliance is not suitable for freezing
foodstuffs.
REMOVING AND INSTALLING THE DOOR
SHELF
To remove the door shelf:
1. Hold the left side of the shelf.
2. Lift the right side of the shelf until it comes free
from the fastener.
9