Use LED bulbs (E14 base) only. The
maximum power is shown on the lamp
unit.
CAUTION!
Disconnect the plug from the mains
socket.
1. Using a screwdriver, remove the screw
from the lamp cover.
2. Detach the lamp cover in the direction of
the arrows.
3. Replace the bulb with the one that has
identical characteristics and is specifically
designed for household appliances.
4. Reassemble the lamp cover.
5. Tighten the screw to the lamp cover.
6. Connect the plug to the mains socket.
7. Open the door.
Make sure that the light switches on.
8.3 Closing the door
1. Clean the door gaskets.
2. If necessary, adjust the door. Refer to
installation instructions.
3. If necessary, replace the defective door
gaskets. Contact the Authorised Service
Centre.
ENGLISH 13
