Zanussi ZWT80700W, Руководство пользователя

Страница: 5 / 32

• Cut off the mains electrical cable close to the
appliance and dispose of it.
• Remove the door catch to prevent children or
pets from becoming trapped in the drum.
• Dispose of the appliance in accordance with
local requirements for the disposal of Waste
Electrical and Electronic Equipment (WEEE).
INSTALLATION
WARNING! Refer to Safety chapters.
INSTALLATION AREA
WARNING! Stability is important to
prevent the appliance from moving.
Make sure that the appliance don't
stand on the power cord
Before installing the appliance, the appliance
location have to meet the following:
≥
20
m
m
≥
45
mm
• Rigid, dry, and level surface.
• Avoid direct sunlight.
• Sufficient ventilation.
• Room temperature is above 0ºC
• Keep far away from the heat resources such as
coal or gas.
UNPACKING THE WASHING MACHINE
WARNING! Packaging material (e.g.
Films, Styrofoam) can be dangerous
for children.
There is a risk of suffocation! Keep all
packaging well away from children.
1. Remove the cardboard box and styrofoam
packing.
2. Lift the washing machine and remove the base
packing.
3. Remove the tape securing the power supply
cord and drain hose.
4. Remove the inlet hose from the drum.
INSTALLATION OF DRAIN HOSE
Available options for upper drain system:
Tighten the end of the
drain hose to bathtub.
< 1000 mm
> 860 mm
Insert the drain hose to
sewage drain of the bath-
tub.
< 1000 mm
> 860 mm
Insert the drain hose to
sewage drain pipe.
WARNING!
• Do not kink or protract the drain
hose.
• Position drain hose
properly ,otherwise damage might
result of water leakage.
• If drain hose is too long, do not
force it into washing machine as it
will cause abnormal noises.
5