Zanussi ZWS 688 Скачать руководство пользователя страница 14

ber of flashes is different from the ones indica-
ted below, this is related to a fault that you can
not solve. In this case, contact your local Serv-
ice Centre.
Press simultaneously the buttons 

4

 and 

5

 for a

few seconds. The red button 

5

 light will flash for

a short time as described (the green flash is not
to be considered) :

4 flashes

 = «

The washing machine does

not start

», follow the corresponding sugges-

tions in «Possible cause/Solutions» box and
restart the programme.

1 flash

 = «

The machine does not fill

», fol-

low the corresponding suggestions in «Possi-

ble cause/Solutions» box and restart the pro-
gramme.

2 flashes

 = «

The machine does not emp-

ty and/or does not spin

», follow the corre-

sponding suggestions in «Possible cause/
Solutions» box and restart the programme.

Once the problem has been eliminated, press
the button 

5

 to restart the programme. If after all

checks, the problem persists, contact your local
Service Centre.

Problem

Possible cause/Solution

The washing machine does
not start:

The door has not been closed (the button 

5

 red light blinks).

• Close the door firmly.
The plug is not properly inserted in the power socket.

• Insert the plug into the power socket.
There is no power at the socket.

• Please check your domestic electrical installation.
The main fuse has blown.

• Replace the fuse.
The programme selector dial is not correctly positioned and/or the button

5

 has not been pressed.

• Please turn the selector dial and/or press the button 

5

 again.

The delay start has been selected.

• If the laundry are to be washed immediately, cancel the delay start.

The machine does not fill:

The water tap is closed (the button 

5

 red light blinks).

• Open the water tap.
The inlet hose is squashed or kinked (the button 

5

 red light blinks).

• Check the inlet hose connection.
The filter in the inlet hose or the inlet valve filter are blocked (the button 

5

red light blinks).

• Clean the water inlet filters (see ‘Cleaning the water inlet filters’ for

more details).

The door is not properly closed (the button 

5

 red light blinks).

• Close the door firmly.

14

 

www.zanussi.com

Содержание ZWS 688

























Отзывы: