manualshive.com logo in svg

Zanussi ZWS 1101, Руководство пользователя

Поделиться
Скачать
Zanussi ZWS 1101 Скачать руководство пользователя страница 14

Problem

Possible cause

Possible solution

 

The water inlet hose is damaged.

Make sure that the water inlet hose has no dam-

ages.

 

The filter in the water inlet hose is

blocked .

Clean the filter. Refer to 'Care and cleaning'.

 

The water tap is blocked or there is

limescale on it.

Clean the water tap.

 

The connection of the water inlet

hose is not correct.

Make sure that the connection is correct.

 

The water pressure is too low.

Contact your local water authority.

The appliance does not

drain the water.

The water drain hose is damaged.

Make sure that the water drain hose has no

damages.

 

The filter of the drain pump is

blocked.

Clean the filter of the drain pump. Refer to 'Care

and cleaning'.

 

The connection of the water drain

hose is not correct.

Make sure that the connection is correct.

 

A washing programme without the

drain phase is set.

Set the drain programme.

 

The function Rinse Hold is on.

Set the drain programme.

The spin phase does not

operate.

The spin phase is off.

Set the spin programme.

 

The filter of the drain pump is

blocked.

Clean the filter of the drain pump. Refer to 'Care

and cleaning'.

 

Balance problems with the laundry

load.

Adjust manually the items in the tub and start

the spin phase again.

There is water on the floor.

Leakages from the couplings of the

water hoses.

Make sure that the couplings are tight.

 

Leakages from the drain pump.

Make sure that the drain pump filter is tight.

 

The water drain hose is damaged.

Make sure that the water inlet hose has no dam-

ages.

You cannot open the appli-

ance door.

The washing programme is in oper-

ation.

Let the washing programme end.

 

There is water in the drum.

Set the drain or the spin programme.

The appliance makes an

unusual noise.

Incorrect level of the appliance.

Adjust the level of the appliance. Refer to 'Instal-

lation'.

 

You did not remove the packaging

and/or the transit bolts.

Remove the packaging and/or the transit bolts.

Refer to 'Installation'.

 

The load is very small.

Add more laundry in the drum.

14

 

Содержание ZWS 1101





















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды