4
4.2.7. End of the programme
When the chosen programme is over, the washing machine
stops automatically and the programme selector stays on
the stop «
» or «rinse hold» position ( ).
The programmes end :
•
by a spinning for the cotton programmes.
•
by a drain (for the synthetics programmes) if you have
not pressed the «rinse hold» pushbutton.
•
by a rinse hold (for the synthetics and wool program-
mes) if you have selected the rinse hold pushbutton. You
can finish these programmes either by a draining by
releasing the rinse hold pushbutton, either by a spin-
ning, by releasing the rinse hold pushbutton, by selec-
ting the spinning program and taking care to release the
on/off pushbutton before doing your choice.
At the end of the cycle, allow the On/Off pushbutton to come
out to switch the washing machine off. Release any other
pushbuttons that are pressed in. Pull out the electricity plug
and close the water supply tap.
Note
: we recommend that you should leave the cover and
the drum open after use to air the washing drum.
