Zanussi ZWR 160 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 8

Zanussi ZWR 160 Скачать руководство пользователя страница 3

3

4. USING

4.1. The control panel

1 - On/Off pushbutton

3 - Rinse hold or Half load pushbutton

2 - Cold wash pushbutton

4 - Program selector

Presented model : ZWR 160 (ZWT 150 without soft opening)

4.2. How to do a wash ?

Before the first wash in your washing machine, we recom-
mend that you should do a preliminary wash at 90°C with de-
tergent but without any washing to clean the tub.

4.2.1. Loading the washing

•

Lift the machine cover.

•

Open the drum by pressing on the locking button A; the
two flaps automatically separate.

•

Insert the washing, close the drum and the cover of your
washing machine.

Warning : before you close the
cover of your washing machine,
make sure that the drum door is
properly closed:
•the two flaps latched together,
•the locking button A extended.

4.2.2. Proportioning of detergents

Your washing machine was designed to reduce water and
detergent consumption, therefore reduce the doses recom-
mended by detergent manufacturers.
Put the powder detergent dose into the wash compartment

and into the prewash compartment

if you chose the

«prewash» option. Put the softener into the

compartment

if you wish.
If you are using a different type of detergent, refer to the «de-
tergents and additives» section in the washing guide.

4.2.3. Choice of the pushbuttons

Press the chosen pushbuttons.

4.2.4.

«On/off» pushbutton

To switch on your appliance, press this pushbutton. The
control lamp lights on.

4.2.5.

«Cold wash» pushbutton

This pushbutton is used for cold washing ; water input the
drum is not heated.

4.2.5.1. «Half load» pushbutton

This pushbutton allows to wash small quantity of linen not
much soiled (max. 2,5 kg) on cotton programmes only by re-
ducing the water quantity during rinsings.

4.2.6. Choice of the programme

Select the programme depending on the nature and the de-
gree of soil of the laundry. Turn the programme selector
clockwise to select the chosen programme.

4.2.7. Starting the programme

After you choose the washing programme, press the «On/
Off» pushbutton to start the cycle.

1 2 3

4

A

«
1
2
3
4
5
...
»

Содержание ZWR 160









Отзывы:

Нет отзывов