
A tune sounds when the appliance is activated.
SETTING A PROGRAMME
1. Touch the programme button and set the
programme:
• The indicator of the button
flashes.
• The display shows the programme duration.
2. If necessary, change the temperature and the
spin speed or add available options. When you
activate an option, the indicator of the set
option comes on.
If you set something incorrect, the
display shows the message
.
STARTING A PROGRAMME WITHOUT THE
TERMINA EN/EM OPTION
Touch the button
.
• The indicator of the button
stops to
flash and stays on.
• The programme starts, the lid locks, the
indicator
is on.
• The drain pump can operate for a short time
at the beginning of the washing cycle.
After approximately 15 minutes from
the start of the programme:
• The appliance adjusts automatically
the programme duration agree with
the laundry load.
• The display shows the new value.
STARTING A PROGRAMME WITH THE
TERMINA EN/EM OPTION
1. Touch the button
again and again to choose
the number of hours in which you want the
washing cycle to be finished.
The display shows the number of hours you set
(e.g.
) and the indicator above the button
is
on to show that his option is active.
2. Touch the button
:
• The door is locked.
• The appliance starts the countdown.
• When the countdown is completed, the
programme starts automatically.
You can cancel or change the set of
the Termina en/em option before you
touch the button
. After touching
the button
you can only cancel the
Termina en/em option.
To cancel the Termina en/em option:
a. Touch the button
to set the appliance
to pause. The indicator of button
flashes.
b. Touch the button
until the indicator
above this button goes off.
Touch the button
again to start the
programme immediately.
When using liquid detergents in
combination with the Termina en/em
option, add the liquid detergents with
a dosing ball (supplied by the
detergent's manufacturer). Put the
dosing ball inside the washing
machine's drum, on top of the
garments.
INTERRUPTING A PROGRAMME AND
CHANGING THE OPTIONS
You can change only some options before they
operate.
1. Touch
.
The indicator of this button flashes.
2. Change the options. If you change any option
the Termina en/em option (if set) will be
disabled.
3. Touch
again.
The programme continues.
CANCELLING A PROGRAMME
1. Press the button On/Off for some seconds
to cancel the programme and to deactivate the
appliance.
2. Press the same button again to activate the
appliance. Now, you can set a new washing
programme.
Before starting the new programme
the appliance could drain the water. In
this case, make sure that the detergent
is still in the detergent compartment, if
not fill the detergent again.
14