Zanussi ZWJ12591W, Руководство пользователя, Страница: 7 / 28

• light blinking: the door is opening in a few
minutes.
Display (10)
1 2 3
5 4
The display shows the following information:
1 Child safety lock
This device permits you to leave the appliance unattended during it's functioning.
2
When you set the «proportional» programmes, the display shows the wash duration of the maximum
load. After you press the button 7 , the arrows animation appears to indicate that the appliance calcu-
lates the laundry amount and the real duration. During this time, the washing duration shown decrea-
ses.
When the appliance finishes to calculate, the arrows animation disappears. The washing time is ad-
justed to the real load.
3
Duration of the selected programme
After you set a programme, the duration is displayed in hours and minutes (for example ). The
duration is calculated automatically on the maximum load for each type of fabric. After the programme
has started, the time remaining is updated every minute.
Delayed start
The delay set appears for a few seconds, then the display show again the duration of the set pro-
gramme. The delay time value decreases by one unit every hour and then, when 1 hour remains, every
minute.
Alarm codes
In the event of operating problems, some alarm codes can be displayed, for example (see
paragraph «What to do if...»).
Incorrect option selection
If you set an option not compatible with the set wash programmed, the display shows the message
Err for a few seconds. The light of button 7 starts flashing with red colour.
End of programme
When the programme has finished, a flashing zero ( ) appears. The light 9 and the light of button 7
go out. The door can be opened.
4
Washing programme phase icons
When you set the wash programme, the icons corresponding to the different phases making up that
programme appear on the display.
After you have pressed button
7 , the only running phase icon stays on. When the programme has
finished, the display shows three flashing zero ( 0.00 ).
7
www.zanussi.com