Zanussi ZWH 7142 J, Руководство пользователя, Страница: 10 / 28

different speed. The relevant pilot light illumi-
nates.
Select the available options by means of
buttons 3, 4, 5 and 6
Depending on the programme, different op-
tions can be combined. These must be selec-
ted after choosing the desired programme and
before starting the programme. When these
buttons are pressed, the corresponding pilot
lights illuminate. When they are pressed again,
the pilot lights go out. If an incorrect option is
selected, the integrated
red pilot light of the
button 7 flashes 3 times and the message Err
is displayed.
For the compatibility among the washing pro-
grammes and the options see chapter
«Wash-
ing programmes» .
Start the programme by pressing button
7
To start the selected programme, press this
button; the corresponding green pilot light
stops blinking.
The pilot light
9 illuminates to indicate that the
appliance starts operating and the door is
locked.
If you have chosen a delayed start, the machine
will begin the countdown.
Important! If an incorrect option is selected,
the message Err is displayed for a few
seconds and the red pilot light of this button
blinks 3 times.
Select the Delay Start by pressing button
8
Before you start the programme, if you wish to
delay the start, press this button to select the
desired delay.
The selected delay time value will appear on
the display for a few seconds, then the dura-
tion of the programme will appear again.
You must select this option after you have set
the programme and before you start the pro-
gramme.
You can cancel or modify the delay time at any
moment, before you press button
7 .
Selecting the delay start :
1. Select the programme and the required
options.
2. Select the delay start by pressing button
8 .
3. Press button 7 :
- the machine starts its hourly countdown.
- the programme will start after the selec-
ted delay has expired.
Cancelling the Delay Start after having started
the programme:
1. Set the washing machine to PAUSE by
pressing button
7 .
2. Press button 8 once. On the display will
appear ' .
3. Press button 7 again to start the pro-
gramme.
Important!
• The selected delay can be changed only af-
ter selecting the washing programme again.
• The door will be locked throughout the delay
time. If you need to open the door, you must
first set the washing machine to PAUSE by
pressing button
7 and wait a few minutes
before opening the door. After you have
closed the door, press the same button
again.
Important! The Delay Start cannot be
selected with the draining programme.
Altering an option or a running
programme
It is possible to change some options before
the programme carries them out.
Before you make any change, you must pause
the washing machine by pressing button
7 .
Changing a running programme is possible on-
ly by resetting it. Turn the programme selector
dial to
and then to the new programme po-
sition. Start the new programme by pressing
button
7 again.
The washing water in the tub will be not emp-
tied out.
Interrupting a programme
Press the button 7 to interrupt a programme
which is running, the corresponding pilot light
10
www.zanussi.com