UP- Flap position if using
POWDER detergent
DOWN - Flap position if
using LIQUID detergent
during main wash
PUSH
REM
O
VE
TO
C
LEA
N
PUSH
RE
M
O
VE
TO
C
LEA
N
If the flap is not in the desired position:
• Remove the drawer. Push the drawer edge outwards
where indicated by the arrow (PUSH) to facilitate
drawer removal.
The flap is down and you wish to use powder detergent:
• Rotate the flap up-
wards. Ensure to fit the
flap completely in.
• Carefully put the drawer
back.
• Measure out the deter-
gent.
• Pour the powder deter-
gent into the main wash
compartment .
The flap is up and you wish to use liquid detergent:
• Rotate the flap down-
wards.
• Carefully put the drawer
back.
• Measure out the detergent.
For the quantity of detergent, refer always to what
is written on the product packing and ensure that
the detergent can be poured in the drawer.
• Pour the liquid detergent in the compartment
without exceeding the limit indicated in the flap. The
detergent must be placed in the appropriate com-
partments of the dispenser drawer before starting the
wash programme.
Warning! Do not use the flap in "DOWN" position
with:
• Gelatinous detergent or thick detergent.
• Powder detergent.
• With programmes with prewash.
• Do not use liquid detergent if the washing programme
doesn't start immediately.
In all above listed cases, use the flap in "UP" posi-
tion .
Measure out the fabric softener
Pour fabric softener or any
additives into the compart-
ment marked (do not
exceed the «MAX» mark
in the drawer). Any addi-
tives must be placed in the
appropriate compartments
of the dispenser drawer
just before starting the
wash programme.
Close the detergent dispenser drawer
13
