Zanussi ZWG 6100K, Руководство пользователя

Страница: 9 / 32

A
When the flap is in
position B and you
want to use powder
detergent:
1. Remove the
drawer.
2. Adjust the flap in
position
A .
3. Put back the
drawer in the re-
cess.
• Measure out the detergent and the fabric
conditioner.
• Put the detergent and the fabric condition-
er into the compartments.
• Carefully close the detergent drawer.
Setting a programme
1. Turn the programme knob and set the pro-
gramme.
2. The indicator of Start button flashes.
3. If necessary, change the temperature and
the spin speed or add available functions.
When you press the relevant button, the in-
dicator of the set function comes on.
Starting a programme without the delay
start
Press the Start button :
• the indicator of button Start stops to flash
and the indicator is on.
• the programme starts and the door locks
Starting a programme with the delay start
• Press the Delay start button
to set neces-
sary delay. The indicator of the set delay is
on.
• Press the Start button
:
The appliance starts the countdown.
When the countdown is completed, the pro-
gramme starts automatically.
You can change or cancel the delay start
before you press the Start button. After
pressing the Start button you can only cancel
the delay.
To cancel the delay start:
1.
Press the Start button to set the appli-
ance to PAUSE.
2.
Press the Delay button one time, the in-
dicator of the set delay goes off.
3.
Press the Start button again to start the
programme immediately.
Interruption of a programme
1.
Press the button . The indicator flashes.
2.
Press the button again. The washing
programme continues.
Cancel a programme
1.
Turn the programme knob to to cancel
the programme and to deactivate the appli-
ance.
2. Turn the programme knob again to activate
the appliance. You can set a new washing
programme then.
The appliance does not drain the water.
Changing the options
You can change only some options before they
operate.
1.
Press the button . The indicator flashes.
2. Change the options.
3.
Press the button again. The programme
continues.
Open the door
While a programme or the delay start operates,
the appliance door is locked.
Caution! If the temperature and level of
the water in the drum are too high, you
cannot open the door.
To open the appliance door when the
delay start operates:
1.
Press the button to set the appliance to
PAUSE.
2. Wait for some minutes and then you can
open the appliance door.
3. Close the appliance door.
4.
Press the button again and the delay
start continues to operate.
9
www.zanussi.com