5 SUPER ACLARADO button
Can be used with all programmes, except wool.
The machine will add 2 rinses to the selected
programme
.
This option is recommended for people who are
allergic to detergents and in areas where the water is
very soft.
6 “INICIO / PAUSA” button (START/PAUSE)
After having selected the programme and the
required options press this button to start the
machine. The corresponding pilot light stops flashing
and remains lit.
To interrupt a programme which is running, depress
the START/PAUSE button: the corresponding pilot
light starts to flash.
To restart the programme from the point at which it was
interrupted, press the START/PAUSE button again.
7 Programme display
By selecting the wash programme, the pilot lights
corresponding to the various phases making up the
programme come on.
After the machine has started, only the running
phase pilot light stays on.
●
LAVADO = wash
When this light comes on this means that the
machine is performing the washing phase. If you
have selected the PRELAVADO (Prewash)
function, this light will be on during the prewash
phase too.
●
ACLARADOS = rinses
●
CENTRIF. = spin
●
DESCARGA = drain
●
FIN = end of programme
At the end of the programme the pilot light FIN
illuminates.
The “FIN” (END) light flashes in the event of
operating problems :
●
4 flashes: door open
●
2 flashes: problem with water draining
●
1 flash: problem with water supply
For more information see paragraph “Something not
working”?
8 Spin speed selector dial
This dial allows you to reduce the final and the
intermediate spin speeds or to select the NO SPIN
or RINSE HOLD
option.
The maximum speeds are:
●
for cotton: 1200 r.p.m.;
●
for synthetics, hand wash and wool: 900 r.p.m.
●
for delicates fabrics: 700 r.p.m.
●
NO SPIN
: by selecting this option all the
spinning phases are suppressed. To be used for
extremely delicate items.
The machine will add 3 rinses on cotton
programmes and 1 rinse on synthetic
programmes.
●
RINSE HOLD
: by selecting this option the
water of the last rinse is not emptied out to
prevent the fabrics from creasing. When the
programme has finished the phase light END is
on and the door is blocked to indicate that the
water must be emptied out.
To do this:
●
turn the programme selector dial to “O” to
switch the machine off.
●
select the drain
or spin
programme.
Using the spin speed selector dial you can
choose the desired spin. I
f the dial remains on
position
or
the machine will perform the
spin speed at 400 rpm.
●
depress START/PAUSE button.
34
35.292.974.qxd 07/06/2005 18:31 Página 34
