Zanussi ZWF 71340W, Руководство пользователя

Страница: 9 / 20

OPTIONS
TEMP
With this option you can change the default
temperature.
Indicator
= cold water.
The indicator of the set temperature comes on.
SPIN
With this button you can set one of these options:
The indicator of the set option comes on.
• Automatic spin reduction
Set this option to decrease the maximum spin
speed to a half, but not less than 400 rpm.
Suitable for very delicate fabrics.
• Rinse Hold
Set this option to prevent the laundry creases.
The drum turns regularly to prevent the laundry
creases.
There is a water in the drum when
the programme is completed. The
door stays locked. You must drain
the water to unlock the door. To
drain the water refer to ‘At the end
of the programme’.
QUICK
Press this button to decrease the programme
duration.
Set this option for items with light soil or items to
refresh.
The related indicator comes on.
EXTRA RINSE
With this option you can add some rinses to a
washing programme.
Use this option for persons allergic to detergents
and in areas where the water is soft.
The related indicator comes on.
1)
DELAY START
With this option you can delay the start of a
programme by 3, 6 or 9 hours.
The indicator of selected delay comes on.
SETTINGS
PERMANENT EXTRA RINSE
With this option you can permanently have an extra
rinse when you set a new programme.
• To activate/deactivate this option press Spin
and Quick at the same time until the indicator
comes on/goes off.
BEFORE FIRST USE
1. Put a small quantity of detergent in the
compartment for washing phase.
2. Set and start a programme for cotton at the
highest temperature without laundry.
This removes all possible dirt from the drum and the
tub.
DAILY USE
WARNING! Refer to Safety chapters.
LOADING THE LAUNDRY
Open the water tap. Connect the mains plug to the
mains socket.
1. Pull the door handle to open the appliance
door.
2. Put the laundry in the drum, one item at a time.
1) See in "Settings" how to activate this option.
9