Zanussi ZWF 386, Руководство пользователя, Страница: 11 / 28

35
ENGLISH
8. Spin speed selector dial or
no spin / rinse hold options
This dial allows the reduction of the final and the
intermediate spin speed or to select
NO SPIN or
RINSE HOLD options.
The speeds on the dials refer to cotton programmes.
The position 800 r.p.m. corresponds to 700 r.p.m.
for synthetics and wool.
Position 500 r.p.m. is common for all fabrics.
• NO SPIN: by selecting this option all the
spinning phases are turned off. To be used for
extremely delicate items. The washing machine will
add 3 rinses in the cotton programmes and 1 rinse
in the synthetics programmes.
• RINSE HOLD: by selecting this option, the
water of the last rinse is not drained, in order to
prevent the fabrics from wrinkling. When the
programme has finished,
FIN light will illuminate.
To drain the water follow these three steps:
A) Turn the programme selector dial to “
O
”.
B) Select DRAIN or SPIN programme.
C) Press INICIO / PAUSA button.
5. PRELAVADO button
Adds a pre-wash phase at the start of the cycle with
water heating to 30° C.
In COTTON and SYNTHETIC cycles, performs a
short spin before passing to the washing phase.This
option cannot be selected for LANA and LAVADO A
MANO cycles.
6. INICIO / PAUSA button
After selecting the required programme, by the
programme selector (see section 9), press this
button to start the machine; the corresponding
light stops flashing and will keep lighting until
the programme finishes.
To interrupt the running programme, depress
INICIO / PAUSA button: the corresponding
light starts to flash.
To restart the programme from the point at
which it was interrupted, press
INICIO / PAUSA
button again.
7. Programme progress display
During programme development, the light
corresponding to the cycle phase which the machine
is in will illuminate. In other words, if the machine is
in the pre-wash or wash phases the light
LAVADO
will come on; if it is in the rinses phase the light
will come on; if it is in the spin phase the light
will come on; and finally, if it is in the drain phase
the light
will come on.
The light FIN will illuminate to indicate that the
selected programme has finished.
The light FIN flashes in the event of operating
problems:
• 4 flashes: door open.
• 2 flashes: problem with water draining.
• 1 flash: problem with water supply.
For more information see paragraph "Something not
working?" at the end of this booklet.
35.292.992…ZWF386 19/12/06 10:24 Página 35