ENGLISH
11
5 START PAUSE button
After having selected the required programme, press
this button to start the machine; the corresponding
pilot light stops flashing and remains lit.
To interrupt a programme which is running, depress
the START PAUSE button
: the corresponding
pilot light starts to flash.
To restart the programme from the point at which it
was interrupted,
press the START PAUSE button
again
.
6 DELAY START button
This button makes it possible to delay the starting of
the washing programme by 12, 8, 4 and 2 hours. The
delay you have selected is indicated by the coming
on of the corresponding light.
You must select this option after you have set
the programme and before you press the START
PAUSE button
.
You can cancel the delay time at any moment
,
before you press the START PAUSE button
.
If you have already pressed the START PAUSE
button
, and you wish to
cancel
the delay time,
proceed as follows:
• set the washing machine to PAUSE by pressing the
START PAUSE button
;
• press the DELAY START button
once
, the light
relevant to the selected delay goes off .
• press the START PAUSE button
again to start
the programme.
Important!
●
To change
the selected delay, first turn the
selector to “0” position and then select the
washing programme again.
●
The door will be locked throughout the delay time.
If you need to open the door, you must first set
the washing machine to PAUSE by pressing the
START PAUSE button
. After approx. 2
minutes the door can be opened. After you have
closed the door, press the START PAUSE button
again.
The delay start cannot be selected with
programmes Q (Drain) and R (SPIN).
7 Programme progress display
When you choose the delayed start, the light
relevant to the selected delay lights up.
After the machine has started, the remaining time is
shown by the corresponding indicator light.
At the beginning of the programme, only the
light
stays on. When the programme has finished, the
pilot light comes on.
The
light flashes in the event of operating
problems:
• 4 flashes: door open
• 2 flashes: problem with water draining
• 1 flash: problem with water supply
For more information see paragraph “Something not
working”?
9 Programme selector dial
The selector dial can be turned either clockwise or
anticlockwise.
Position
O
corresponds to Reset programme/Switching
OFF of the machine.
At the end of the programme the selector dial
must be turned to position O, to switch the
machine off.
ATTENTION!
If you turn the programme selector dial to another
programme when the machine is working, the lights
of the programme progress display start to flash for 2
seconds. The machine will not perform the new
selected programme
.
A
B
C
L
F
G
H
K
M
N
P
Q
R
J
D
8 h
4 h
2 h
132989221.qxd 19/04/2004 11.47 Pagina 11
