Zanussi ZWD12270W, Инструкция по эксплуатации

Страница: 4 / 5

Operating sequence
1. Load the laundry
2. Measure out detergent – Pour required amount of detergent into main wash
compartment . If you wish to carry out a prewash, pour detergent into prewash
compartment
.
3. Measure out fabric softener – If required pour fabric softener into compartment marked without
exceeding MAX level.
4. Switch the machine on – the display will show a blinking zero or three blinking dashes.
5. Select desired programme/fabric – Once a programme is selected, the relevant phase indicator lights
will come on and the duration of the programme will appear on the display.
6. Select temperature – The appliance will suggest a temperature for the programme, if you wish to
change it press the temperature button.
7. Select Spin Speed or Rinse Hold
8. Select the desired Options
9. Set the delay – Pressing the delay button repeatedly will increase the delay time, which will appear on
the display for 3 seconds.
10. Start the programme – press the Start/Pause button.
How to change an option or programme during the cycle
First press the Start/Pause button. If the programme is running, you will have to cancel the programme
and select a new one. The cycle will resume from the beginning and the water in the tub will not be
emptied. If it is necessary to drain the water, press the Skip/Reset button repeatedly until only the Drain
light is on, then re-start the machine.
How to cancel a programme during the cycle
Pause the machine with the Start/Pause button. Press the Skip/Reset button repeatedly until the display
shows three blinking dashes.
How to open the door during the cycle of a programme
It is possible to open the door of the machine while it is paused providing;
•
The machine is not in the heating phase beyond 55
°
C
• The water level is not too high
• The drum is not turning