Zanussi ZWD 71460 CW, Руководство пользователя, Страница: 16 / 28

When you use the liquid deter-
gent:
• Do not use gelatinous or thick liq-
uid detergents.
• Do not put more liquid then the
maximum level.
• Do not set the prewash phase.
• Do not set the delay start.
SETTING A PROGRAMME
1. Turn the programme knob to switch the
appliance on and set the required programme:
• The indicator flashes.
• The display shows the level of the Time
Manager, the programme duration and the
indicators of the phases of the programme.
2. If necessary, change the temperature and the
spin speed or add available options. When you
activate an option, the indicator of the set
option comes on.
If you set something incorrect, the
display shows the message
.
STARTING A PROGRAMME WITHOUT THE
DELAY START
Press .
• The indicator of stops to flash and
stays on.
• The indicator starts to flash on the
display.
• The programme starts, the door locks, the
display shows the indicator .
• The drain pump can operate for a short time
when the appliance fills water.
After approximately 15 minutes from
the start of the programme:
• The appliance adjusts automatically
the programme duration agree with
the laundry load.
• The display shows the new value.
STARTING A PROGRAMME WITH THE DELAY
START
1. Press again and again until the display
shows the delay you want to set.
The related indicator comes on the display.
2. Press
:
• The appliance starts the countdown.
• The door locks, the display shows the
indicator .
• When the countdown is completed, the
programme starts automatically.
You can cancel or change the set of
the delay start before you press the
. To cancel the delay start:
• Press to set the appliance
to pause.
• Press until the display
shows '.
• Press again to start the
programme immediately.
INTERRUPTING A PROGRAMME AND
CHANGING THE OPTIONS
You can change only some options before they
operate.
1. Press
.
The indicator flashes.
2. Change the options.
3. Press
again.
The programme continues.
CANCELLING A RUNNING PROGRAMME
1. Turn the programme knob to position to
cancel the programme and to deactivate the
appliance.
2. Turn the programme knob again to activate the
appliance. Now, you can set a new washing
programme.
Before starting the new programme
the appliance could drain the water. In
this case, make sure that the detergent
is still in the detergent compartment, if
not fill the detergent again.
OPENING THE DOOR
CAUTION! If the temperature and
level of the water in the drum are too
high and the drum still rotates, you
cannot open the door.
While a programme or the delay start operates, the
appliance door is locked and the display shows the
indicator
.
Open the appliance door when the
programme or the delay start operates:
16