45
MAINTENANCE
Unplug the appliance before carrying out any
maintenance operation.
Periodical cleaning
Wash the interior of the appliance with lukewarm
water and sodium bicarbonate.
Clean cabinet outer surfaces with a silicone-wax
spray.
The condenser and compressor should be cleaned
using a brush or a vacuum cleaner. This latter
operation will maintain the appliance’s excellent
standards of performance and save energy.
Idle periods
During periods when the appliance is not used, you
should take the following precautions:
remove the plug from the wall socket;
remove all food from the appliance;
defrost and clean the interior and all accessories;
leave the door slightly open, thus letting air circulate
and preventing the formation of mould and unpleasant
smells.
SOMETHING NOT WORKING
If the appliance is not functioning properly check
that:
the plug is firmly in the wall socket and the mains
power switch is on;
there is no power failure; the control knob is in the
right position.
Furthermore:
if the appliance seems too noisy check that the sides
are not touching furniture that can transmit or amplify
a noise or a vibration. Also, check that the piping of
the refrigerant system does not vibrate.
If your appliance is still not working properly after
making the above checks, contact your local dealer or
the nearest service center.
To obtain fast service, it is essential that when you
apply for it you specify the model and serial
number of your appliance which can be found
inside the appliance at the bottom on the left hand
side.
GB
GB
