Zanussi ZTR 56 RL, Инструкция пользователя

Страница: 3 / 16

General Safety
■
This appliance contains hydrocarbons in its
cooling unit; maintenance and recharging
must therefore only be carried out by
authorised technicians.
■
Take utmost care when handling your
appliance so as not to cause any damages to
the cooling unit with consequent possible
fluid leakages.
■
The appliance must not be located close to
radiators or boilers.
■
Avoid prolonged exposure of the appliance to
direct sunlight.
■
Do not use other electrical appliances (such
as ice cream makers) inside of refrigerating
appliances.
During Use
■
This appliance is designed for domestic use only,
specifically for the storage of edible foodstuffs
only. It is not intended for commercial or industrial
use.
■
Containers with flammable gases or liquids can
leak at low temperatures. Do not store any
containers with flammable materials, such as
spray cans, fire extinguisher refill cartridges etc. in
the refrigerator.
Maintenance and Cleaning
■
Before cleaning, always switch off the appliance
and disconnect from the electrical supply.
■
When unplugging always pull the plug from the
mains socket, do not pull on the cable.
Servicing
■
This product should be serviced by an authorised
engineer and only genuine spare parts should be
used.
■
Under no circumstances should you attempt to
repair the appliance yourself. Repairs carried out
by inexperienced persons may cause injury or
serious malfunctioning. Contact your local Service
Force Centre.
At the end of the Appliance Life
■
When disposing of your appliance use an
authorised disposal site.
■
Remove the plug and ensure that any locks or
catches are removed, to prevent young children
being trapped inside.
3
IMPORTANT SAFETY INSTRUCTIONS
Prior to Installation
■
Check the appliance for transport damage. Under
no circumstance should a damaged appliance be
installed. In the event of damage please contact
your retailer.
Installation
■
This appliance is heavy. Care should be taken
when moving it.
■
It is dangerous to alter the specifications or
attempt to modify this product in any way.
■
Ensure that the appliance does not stand on the
electrical supply cable.
Important: If the supply cable is damaged, it must
be replaced by a cable available from your local
Service Force Centre.
■
Any electrical work required to install this
appliance should be carried out by a qualified
electrician or competent person.
■
Parts which heat up should not be exposed.
Whenever possible, the back of the appliance
should be close to a wall, but leaving the required
distance for ventilation, as stated in the
installation instructions.
■
The appliance should be left for 2 hours after
installation before it is turned on, in order to allow
the refrigerant to settle.
Refrigerant
■
The refrigerant isobutane (R600a) is contained
within the refrigerant circuit of the appliance, a
natural gas with a high level of environmental
compatibly, which is nevertheless flammable.
■
During transportation and installation of the
appliance, be certain that none of the components
of the refrigerant circuit become damaged.
■
If the refrigerant circuit should become damaged:
- avoid open flames and sources of ignition.
- thoroughly ventilate the room in which the
appliance is situated.
Child Safety
■
Do not allow children to tamper with the controls
or play with the product.
■
There is a risk of suffocation! Keep packaging
material away from children!
These warnings are provided in the interests of your safety. Ensure that you understand them all before
installing or using this appliance. Your safety is of paramount importance. If you are unsure about any
of the meanings of these warnings contact the Customer Care Department.