![background image](http://html.mh-extra.com/html/zanussi/zth485/zth485_user-manual_919691027.webp)
Abnormally
elapsing time
on the LCD
5)
Time to end is calculated on the basis of:
type, volume and dampness of laundry.
Automatic process; this is not a machine
fault.
Programme in-
active
Full water reservoir.
Empty water reservoir
3)
, press START
PAUSE button.
Drying cycle to
short
Small laundry volume./Too dry laundry for
selected programme.
Select time programme or higher drying lev-
el (e.g. EXTRA DRY ).
Drying cycle to
long
6)
Fluff filters clogged.
Clean fluff filters.
To high loading volume.
Respect max. loading volume.
Laundry insufficiently spun.
Spun adequately the laundry.
Particularly high room temperature - no ma-
chine fault.
Lower the room temperature if possible.
1)
In case of error message on the LCD (e.g.
E51
- only dryers with the LCD): Switch the dryer off and on. Set
programme. Press the START PAUSE button. Does not work? - inform local service and quote the error
code.
2)
follow program recommendation - see
Programme overview
chapter
3)
see
Care and cleaning
chapter
4)
see
Machine settings
chapter
5)
only dryers with the LCD
6)
Note: After around 5 hours the drying cycle ends automatically (see
Drying cycle complete
section).
Technical data
Dimensions (mm)
Width / Height / Depth
85 x 60 x 58 cm
Max. depth
(with the appliance door open)
109 mm
Max. width
(with the appliance door open)
950 mm
Electrical connection
Voltage
230 V
Frequency
50 Hz
Fuse
6 A
Total power
1050 W
Drum volume
108 l
Weight of the appliance
50,5 kg
Laundry: max. weight
7 kg
Type of use
Household
Ambient temperature
Min.
5 °C
Max.
35 °C
Energy consumption
1)
kWh/cycle
2,04 kWh
Annual energy consumption
2)
251 kWh
Energy efficiency class
A+
Power consumption
Left-on mode
0,68
27
www.zanussi.com
Содержание ZTH485
Страница 58: ...58 www zanussi com ...
Страница 59: ...59 www zanussi com ...
Страница 60: ...www zanussi com shop 136915201 A 532012 ...