Zanussi ZTE 275, Руководство пользователя

Страница: 15 / 25

15
During the drying cycle or at the end, it is normal for water
to be present on the surface of the condenser insertion.
To pull out the condenser, first turn the two red stops
downwards and then remove the condenser unit
holding it at the handle.
„
Clean it with a brush and rinse it under theshower
if necessary. Also clean the outside, removing all
fluff. Clean the rubber seal round the condenser
cabinet and in the inner part of the small door with
a damp cloth.
Important
Do not use pointed objects or utensils to clean
the spaces between the plates, as this could
damage the condenser and make it permeable.
Re-fit the condenser, turn the red stops upwards
and close the door.
Important!
Do not use this appliance if the condenser has
not been fitted.
Emptying the water reservoir
Water extracted from the laundry condenses inside
the machine and is collected in a reservoir.
The
reservoir must be emptied after each drying
cycle
to ensure efficient operation when
the machine is next used. The pilot light
“Waterhouder” (Water reservoir full) reminds you
this operation.
Proceed as follows:
• Pull out the reservoir
• Turn it upside down and let water flow down
• Re-fit the reservoir
A