Zanussi ZSM17100XA, Руководство пользователя

Страница: 10 / 16

Problem Possible cause Remedy
The appliance does not op-
erate. The appliance is deactivated. Activate the appliance.
The appliance does not op-
erate. The appliance is not plugged in. Plug in the appliance.
The appliance does not op-
erate. The fuse in the fuse box is blown. Check the fuse. If the fuse blows
more than one time, contact a quali-
fied electrician.
The appliance does not op-
erate. The door is not closed properly. Make sure that nothing blocks the
door.
The lamp does not operate. The lamp is defective. The lamp has to be replace.
There is sparking in the
cavity. There are metal dishes or dishes with
metal trim. Remove the dish from the appliance.
There is sparking in the
cavity. There are metal skewers or aluminium
foil that touches the interior walls. Make sure that the skewers and foil
does not touch the interior walls.
The turntable set makes
scratching or grinding
noise. There is an object or dirt below the
glass cooking tray. Clean the area below the glass cook-
ing tray.
The appliance stop to oper-
ate without a clear reason. There is a malfunction. If this situation repeats call the cus-
tomer service center.
If you cannot find a solution to the problem
yourself, contact your dealer or the customer
service centre. The necessary data for the customer service
center is on the rating plate on the appliance.
We recommend that you write the data here:
Model (MOD.) .........................................
Product number (PNC) .........................................
Serial number (S.N.) .........................................
Installation
Warning! Refer to the Safety chapters.
Caution! Do not block the air vents. If you
do that, the appliance can overheat.
Caution! Do not connect the appliance to
adapters or extension leads. This can
cause overloading and risk of fire.
• The appliance is for built-in use only.
• The fitted cabinet must not have a back wall
behind the appliance.
• Put the appliance far away from steam, hot air
and water splashes.
• If you transport the appliance in cold weather,
do not activate it immediately after the instal-
lation. Let is stand in the room temperature
and absorb the heat.
Electrical installation
Warning! Only a qualified person must do
the electrical installation.
The manufacturer is not responsible if you
do not follow the safety precautions from
the chapter "Safety Information".
10
www.zanussi.com