19
Cleaning the hinged grill
This model has been fitted with a hinged top grill
element to enable you to clean the roof of the oven
easily.
Before proceeding ensure the oven is isolated
from the electricity supply. Then undo the screw
which holds the grill in place. (see Fig. 10)
Fig. 10
FO 1168
Then gently pull the grill downward to allow
access to the oven roof. (see Fig. 11)
Fig. 11
FO 1169
Clean the oven roof with a suitable clener and
wipe dry before replacing the hinged grill element.
Gently push up the grill element into place and
firmly screw into place the holding nut.
NOTE: Ensure the grill holding nut is firmly in
place to avoid the grill falling down during
operation.
If the oven does not come on:
* Check the oven is in manual operation
* Check that it is plugged in properly
* Check that the socket switch and/or the switch
from the mains supply to the oven are ON
* Replace the fuse in the plug, if required, with
another of the same rating and check that this
plug has been wired up correctly
* Check that the socket, when present, is
receiving power - by plugging in an appliance
you know to be working
* Check that the fuse in the fuse box is intact
In after all these checks, the oven still does not
work, contact your nearest Fisher & Paykel
authorised Service Centre quoting your model and
serial number.
What happens if something goes wrong
Please note that it will be necessary to provide
proof of purchase for any inguarantee service
calls.
In-guarantee customers should ensure that the
above checks have been made as the engineer
will make a charge if the fault is not a
mechanical or electrical breakdown.
