background image

2. Put the detergent in the compartment (A). You

can use detergent in tablets, powder or gel.

3. If the programme has a prewash phase, put a

small quantity of detergent on the inner part of

the appliance door.

4. Close the lid. Make sure that the lid locks into

position.

For information about the detergent

dosage, refer to the manufacturer's

instructions on the packaging of the

product. Usually, 20 - 25 ml of gel

detergent is adequate for washing a

load with normal soil.

Do not fill the compartment (A) with

more than 30 ml of gel detergent.

SETTING AND STARTING A PROGRAMME

Starting a programme

1. Open the water tap.

2. Close the appliance door.

3. Turn the knob until the programme marker is

aligned with the programme you want to set.

• The on/off indicator is on.

• The start indicator starts to flash.

4. Press 

.

• The programme starts.

• The indicator of the washing phase is on.

• The on/off indicator and start indicator are

on.

Starting a programme with delay start

1. Set a programme.
2. Press 

 to delay the start of the programme

by 3 hours.

The light related to the button is on.

3. Press 

 to start the countdown.

The light related to the button is on.
During the countdown, it is not possible to change

the programme.
When the countdown is complete, the programme

starts.

Cancelling the programme

Press and hold 

 until the light related to the

button starts to flash.

Make sure that there is detergent in the detergent

dispenser before you start a new programme.

Cancelling the delay start while the

countdown operates

1. Press and hold 

 until the light related to

the button starts to flash.

2. Press 

 to start the programme.

Opening the door while the appliance

operates
Opening the door while a programme is running

stops the appliance. It may affect the energy

consumption and the programme duration. After

closing the door, the appliance continues from the

point of interruption.

If the door is opened for more than 30

seconds during the drying phase, the

running programme ends. It does not

happen if the door is opened by AirDry

function.

Do not try to close the appliance door

within 2 minutes after AirDry

automatically opens it as this may

cause damage to the appliance.

If, afterwards, the door is closed for at

least 3 minutes, the running

programme ends.

The Auto Off function
This function decreases energy consumption by

deactivating automatically the appliance when it is

not operating.
The function comes into operation:

• When the programme is complete.

• After 5 minutes if a programme was not started.

End of the programme
When the programme is complete, the Auto Off

function switches the appliance off.

Close the water tap.

13

Содержание ZSFN131W1

























Отзывы: