Zanussi ZRB939NW2 Скачать руководство пользователя страница 12

Страница: 12 / 16

Problem

Possible cause

Solution

The lamp does not work.

The lamp is in stand-by.

Close and open the door.

The lamp is defective.

Refer to "Replacing the lamp".

As much as the advice does not lead to result, call the nearest brand-mark service.

Replacing the lamp

1. Disconnect the appliance.
2. Push the movable part to unhook the lamp cover (1).
3. Remove the lamp cover (2).
4. If needed replace the lamp with a light of similar

characteristic and power. It is suggested to use Os-

ram PARATHOM SPECIAL T26 0.8 Watts.

5. Install the lamp cover.
6. Connect the appliance.
7. Open the door. Make sure that the lamp comes on.

Closing the door

1. Clean the door gaskets.
2. If necessary, adjust the door. Refer to "Installation".
3. If necessary, replace the defective door gaskets.

Contact the Service Center.

Dimension

Height

2010 mm

Width

595 mm

Depth

658 mm

Rising Time

18 h

Voltage

230-240 V

Frequency

50 Hz

The technical information are situated in the rating plate

on the internal left side of the appliance and in the energy

label.

Installation

Caution! Read the "Safety Information" carefully for

your safety and correct operation of the appliance

before installing the appliance.

Positioning

Install this appliance at a location where the ambient tem-

perature corresponds to the climate class indicated on the

rating plate of the appliance:

www.zanussi.com

Содержание ZRB939NW2

















Результаты поиска

Содержание ZRB939NW2

Отзывы:

Бренды по названию

Популярные бренды

Zanussi ZRB939NW2, Руководство пользователя

Результаты поиска

Содержание ZRB939NW2

Отзывы:

Бренды по названию

Популярные бренды