•
Connect the power cable to a 220-240V, 13 amp supply
that is located in a safe, dry area.
•
The heater must be properly installed before it is used.
•
This unit is equipped with three heat settings.
●
The switches on the heater head are used to control the
heat settings:
•
Turn on the (
•
) switch to operate the heater at 650W.
•
Turn on the (
••
) switch to operate the heater at
1300W.
•
Turn on both switches (
•
&
••
) to operate the heater at
2000W (MAX).
•
Turn all the switches to the off position to turn off
the heater.
•
WARNING:
Although the parasol heater is shower proof,
do not use when raining or in wet conditions.
•
WARNING:
Always disconnect the power cable from the
electrical supply when the parasol heater is not in use.
OPERATING INSTRUCTIONS
15
Revision 1.2
