Problem
Possible cause
Remedy
The display shows an error code
that is not in this table.
There is an electrical fault.
• Deactivate the oven with the
house fuse or the safety
switch in the fuse box and ac-
tivate it again.
• If the display shows the error
code again, contact the Cus-
tomer Care Department.
The appliance is activated and
does not heat up. The fan does
not operate. The display shows
"Demo".
The demo mode is activated.
1. Deactivate the oven.
2. Press and hold the button
.
3. When an acoustic signal
sounds, turn the knob for the
oven functions clockwise to
the first function. "Demo"
flashes in the display.
4. Turn the knob for the oven
functions to the off position.
5. Release the button .
6. Turn the knob for the tem-
perature clockwise and hold
it for three seconds. The
acoustic signal sounds three
times. The demo mode is de-
activated.
Service data
If you cannot find a solution to the problem
yourself, contact your dealer or an Authorised
Service Centre.
The necessary data for the service centre is on
the rating plate. The rating plate is on the front
frame of the appliance cavity. Do not remove
the rating plate from the appliance cavity.
We recommend that you write the data here:
Model (MOD.)
.........................................
Product number (PNC)
.........................................
Serial number (S.N.)
.........................................
Installation
WARNING!
Refer to Safety chapters.
www.zanussi.com
23
Содержание ZOP37962
Страница 1: ...EN ZOP37962 User Manual Oven ...
Страница 26: ...26 www zanussi com ...
Страница 27: ...www zanussi com 27 ...
Страница 28: ...www zanussi com shop 867318792 A 182015 ...