Zanussi ZOB K 93, Инструкция пользователя

Страница: 14 / 28

14
The Safety Thermostat
This oven is provided with a safety
thermostat. In case of malfunctioning of the
main thermostat, and consequent over-
heating, the safety device will stop the power
supply to the appliance. If this happens, call
your local Service Centre. Under no
circumstances should you attempt to repair
the appliance yourself.
Error code
The electronic programmer does a continu-
ous diagnostic check of the system. If some
parameters are not correct, the control unit
will stop the activated functions and it will
show on the display the corresponding error
code (letter "E" followed by number digits -
see Fig. 20).
For further details, refer to chapter "What
happens if something goes wrong" on page
97.
Demo mode
This mode is intended to be used at the
shops to demonstrate the oven functionality
without any power consumption except the
oven lamp. To activate this function the
appliance should be in stand-by mode.
—
Press button B and
“ “
for approxi-
mately 2 seconds (Fig. 19). An acoustic
alarm will sound for a short time.
—
Press button and the “
id
” indication
will appear on the display .
All oven functions can be selected.
The thermometer symbol will not flash any-
more and “
id
” indication will be replaced by
number digits.
Follow the above described procedure
to disable the demo mode.
B
Fig. 18
B
Fig. 19
B
Fig. 20
3) Set the temperature by pressing button
“ “ or “ “. The temperature will appear
on the display.
4) Press button
B
. The temperature
display will show "FHU" (Fig. 18).
5) press button and the symbol “ ° ” will
flash for approximately 10 seconds. Now
it is possible to select the required
temperature by pressing button “ “ or
“ “.
4) When the required temperature is reached,
an acoustic alarm will sound for a short
time, and the temperature display will
revert to the set temperature.
This function can be used with any cooking
function or temperature.
The Cooling Fan for the
Controls
This oven is provided with a cooling fan,
meant to keep the front panel, the knobs
and the oven door handle cool. This fan may
run on after the oven or grill is switched off,
until a normal temperature is reached.