Zanussi ZOB 550, Руководство пользователя

Страница: 27 / 36

27
Once the inner pane has been removed, clean
the door and the pane.
Clean the glass pane with warm water only. Do
not use rough cloths, scouring pads, steel wool,
acids or abrasive products, so that the surfaces
of the glass pane and the door are not damaged.
After cleaning, re-insert the inner pane.
The inner pane “D” must be arranged
with the decorated surface to the inner
side of the door. The slight roughness
of the printing must not be discernible
when you stroke your fingers over the
visible surface.
After reinserting the inner pane, adjust the
retainer “C”, then:
Fig. 5: insert the right end of the perforated
aluminium plate ”A” into the recess in the retainer
“C”.
Fig. 6: Then insert the left end of the perforated
aluminium plate ”A” into the recess in the retainer
“B”.
Insert the retainer “B” at this point and check that
everything is securely fastened and firm.
Appliances in stainless steel or aluminium
We recommend you only clean the oven door
with a wet sponge and then dry it afterwards with
a soft cloth. Never use scourers, acids or harsh
abrasives, as these can damage the surface.
Clean the panel with the same care.
DO NOT clean the oven door while
the glass panels are warm. If this
precaution is not observed the glass
panel may shatter.
If the door glass panel becomes chipped or has
deep scratches, the glass will be weakened and
must be replaced to prevent the possibility of the
panel shattering. Contact your local Service Centre
who will be pleased to advise further.
Fig. 6
A
B
A
C
Fig. 5
If necessary, it is possible to reverse
the oven door. This operation
should be carried out by authorized
personnel ONLY.
Customers are recommended not to
carry out this operation themselves.
This will be a chargeable visit.