Zanussi ZOB 463, Руководство пользователя

Страница: 28 / 44

28
“Cooking duration” function
This function allows the oven to automatically switch
off at the end of a programmed cooking duration time. Place
food in the oven, select a cooking function and adjust the
cooking temperature. Press button
repeatedly to select
the “Cooking Duration” function. The relevant pilot lamp
will start flashing. Then, proceed as follows:
Electronic programmer
4
5
1 2 3
6
7
8
1. Push button for selecting a function
2. Decreasing control button “ ”
3. Increasing control button “ ”
4. Display
5. “Cooking Duration” pilot lamp
6. “End of cooking” pilot lamp
7. “Minute minder” pilot lamp
8. “Time of day” pilot lamp
The oven will only work if the time of day
has been set.
However, the oven can also be operated without
any programme.
In the event of a power failure, all the settings (time
of day, programme setting or programme in
operation) will be cancelled. When the power is
restored, the numbers in the display will flash, and
the clock/timer has to be reset.
Setting the time of day
When the power supply is switched on, or after a power
failure, the “Time of day” pilot lamp will flash on the display.
To set the correct time of day:
1.
Press button “ ” or “ ”.
2. After the setting is carried out, wait for 5 seconds: the
“Time of day” pilot lamp will go out and the
display will show the set time. The appliance is ready
for use.
To reset the correct time of day:
1. Press button repeatedly to select the “Time of
day” function. The relevant pilot lamp will start
flashing. Then proceed as described above.
The time of day can only be reset if no automatic
function (cooking duration or end of cooking
) has been set.