Zanussi ZOB 240, Руководство пользователя

Страница: 32 / 52

Electrolux
32
Safety Thermostat
To prevent dangerous overheating (through
incorrect use of the appliance or defective
components), the oven is fitted with a safety
thermostat, which interrupts the power supply. The
oven switches back on again automatically, when
the temperature drops.
Should the safety thermostat trigger due to
incorrect use of the appliance, it is enough to
remedy the error after the oven has cooled down;
if on the other hand, the thermostat triggers
because of a defective component, please contact
Customer Service.
The cooling fan
The oven is provided with a cooling fan, meant to
keep the front panel, the knobs and the oven door
handle cool.The fan switches on automatically
when the oven is activated. Warm air is blown out
through the aperture near the oven door handle.
The fan switches off when, after cooking, the oven
function control knob is set to OFF position
0
.
Before using the oven for the first time
To open the oven door, always hold
the handle in the centre.
Remove all packaging, both inside and
outside the oven, before using the oven.
Before using for the first time, the oven should
be heated up without food.
During this time, an unpleasant odour may be
emitted. This is absolutely normal. It is caused by
manufacturing residues.
Ensure the room is well ventilated.
1. Switch the oven function control knob to
conventional cooking .
2. Set the thermostat control knob to 250.
4. Open a window for ventilation.
5. Allow the oven to run empty for
approximately 45 minutes.
This procedure should be repeated with the
Grill function for approximately 5-10 minutes.
Then let the oven cool down. Then
dampen a soft cloth with warm water and a
little mild washing-up liquid and use this to
clean the oven cavity.
Before using for the first time, carefully wash
the oven accessories as well.
!