Zanussi ZKT 662 LN Скачать руководство пользователя

Страница: 20 / 25

163

What to do when . . .

First aid for faults

When a fault occurs, it is possible that this is the result of a small error, which you can remedy yourself using the

following notes.
Do not carry out any other work yourself, if the information below does not help your specific problem.

Repairs to the appliance must only be carried out by specialists. Improper repair work can result in conside-

rable danger for the user. If you need repair work carried out, contact your specialist dealer, or our Customer

Service department.

What do I do when . . .

. . . a buzzing noise is heard when a zone is

heating up?

This is not a fault.

It will stop as the heat increases.

. . . discolorations appears in the cooking zone?

This is not a result of changes in the material, but is

burned--in remnants that have not been regularly re-

moved. They will have no effect of the function or the

durability of the ceramic hob.

. . . the cooking zones do not function?

Check whether

the appliance is switched on,

the control lamps are on in the operating field,

the respective cooking zone is switched on,

the cooking zone power level has been set to the

desired cooking--on level,

the fuses in the house installation (fusebox) have

tripped.

If the fuses repeatedly trip, call in an approved

electrician.

the safety cut--out of the cooking zones has been

tripped.

. . . the cooking zones cannot be switched on?

Check whether

the operating field is locked,

a time period of more than 10 seconds has expi-

red between the operation of the On/Off key and

switching on the desired cooking zone,

the touch surface is too large

(the finger should only be used lightly)

the touch switch has been partly covered by a

damp cloth or by a liquid.

the operating field has been touched too early fol-

lowing a mains failure (to clear the condition,

switch the fuse out and then in again).

. . . the displays all go out except for the ”H” for resid-

ual heat?

Check whether

the On/Off key has been accidentally operated,

the touch switches are partly covered by a damp

cloth, liquid or something similar.

. . . the displays suddenly go out?

Check whether

the electricity supply has been temporarily dis-

connected, or has failed.

. . . after switching off, no «H» for residual heat is dis-

played ?

Check whether

The cooking zone has only been in operation for

a short time, and is therefore not hot enough.

If the cooking zone is hot, please call in an approved elec-

trician, or call our Customer Service department.

. . . one of the cooking zones cannot be switched off

Check whether

the touch keys are partly covered by a damp cloth

or a liquid.

the corresponding cooking zone key (2) is active,

i.e., the decimal point (13) is lit up.

If you call in Customer Service as a result of one of the

items listed above, or as a result of incorrect operation,

the visit of the Customer Service technician will not be

free of charge, even during the guarantee period.

Содержание ZKT 662 LN


























Результаты поиска

Содержание ZKT 662 LN

Отзывы:

Похожие инструкции для ZKT 662 LN

Бренды по названию

Популярные бренды

Zanussi ZKT 662 LN, Руководство по эксплуатации

Результаты поиска

Содержание ZKT 662 LN

Отзывы:

Похожие инструкции для ZKT 662 LN

Бренды по названию

Популярные бренды