Zanussi ZKT 641 F, Инструкция по установке и эксплуатации

Страница: 16 / 28

16
3
In the event of any other fault codes that arise, disconnect the appliance
from the electrical supply for a few seconds (Take out the fuse from the
house’s wiring system). If the fault code is displayed again, please call your
local Service Force Centre and report the fault code.
If you are unable to remedy the problem by following the above sug-
gestions, please contact your local Service Force Centre.
1
Warning! Repairs to the appliance are only to be carried out by qualified
service engineers. Considerable danger to the user may result from improp-
er repairs.
3
If the appliance has been operated incorrectly, the visit from the service
technician or dealer may not take place free of charge, even during the war-
ranty period.
Er40
is displayed The overvoltage protec-
tor has been activated
(for an incorrect con-
nection see above
Er25
or for overheating of the
electronic components
see
Er21 )
Separate the appliance
from the mains for a
few minutes (remove
the mains fuse).
Let the appliance cool
down.
Problem Possible cause Remedy