Zanussi ZI 9454A Скачать руководство пользователя страница 5

20

Storage of frozen food

When first starting-up or after a period out of use,
before putting the products in the compartment let
the appliance run for at least two hours on the Auto
freeze setting, then push again the Auto Freeze
button.

Important

In the event of accidental defrosting, for example
due to a power failure, if the power has been off
for longer that the value shown in the technical
characteristics chart under “rising time”, the
defrosted food must be consumed quickly or
cooked immediately and then refrozen (after
cooling).

F. Alarm reset light

G. Alarm reset button

In the event of an abnormal temperature rise inside
the freezer (e.g. power cut) warning light (F) will start
to flash and a buzzer will sound.

After the temperature has returned to normal, the
warning light (F) will continue to flash, although the
buzzer has stopped.

When the alarm button (G) is pressed, the warmest
temperature reached in the compartment flashes on
the indicator (D).

If the power has been off for a long time, frozen food
should be consumed as quickly as possible, or
cooked and then re-frozen.

Operation

Insert the plug in the power socket. Press the button
ON/OFF (B). The freezer is switched on.

The freezer is pre-set to run at -18°C. this
temperature will be reached in a few hours.

As soon as the appliance is switched on the
temperature indicator (D) shows the current
temperature inside the freezer, the alarm reset light
(F) flashes and a buzzer sounds. Press the alarm
reset button (G). The buzzer stops and the alarm
light (F) continues to flash until the setting
temperature is reached.

H. Auto Freeze pilot light

I. Auto Freeze button

To freeze fresh foods, the “Auto freeze” function must
be actived. Press the auto freeze button (I).The
relevant pilot light (H) switches on. When this function
is on, SP is shown on the dispay .

The function can be deactived at any time, by
pressing the button (I), otherwise it automatically
switched off. With deactived functionth pilot light (H)
switches off.

Freezing fresh food

To freeze fresh food, press the Auto freeze button (I)
at least 24 hours before.

Place the food to be frozen in the Auto freeze
compartment. The maximum quantity of food which
can be frozen in 24 hrs. is shown on the rating plate.

Warning!

When use the “Auto freeze” function:

about 6 hrs

before

about 24 hrs

before

not needed

not needed

Introducing small quantities of fresh food
(about 5 kg)

Introducing the maximum quantity of food
(see rating plate)

Introducing frozen food

Introducing small quantities of fresh food
daily 2 kg maximum

Thawing

Deep-frozen or frozen food, prior to being used, can
be thawed in the refrigerator compartment or at
room temperature, depending on the time available
for this operation.

Small pieces may even be cooked still frozen, directly
from the freezer: in this case, cooking will take longer.

Ice-cube production

This appliance is equipped with one or more trays
for the production of ice-cubes. Fill these trays with
water, then put them in the freezer compartment.

Do not use metallic instruments to remove the
trays from the freezer.

D. Temperature indicator

During normal functioning the indicator shows the
temperature inside the freezer.

Attention!

Difference between the temperature displayed and
temperature setting is normal. Especially when:

-  a new setting has recently been selected

-  the door has been left open for a long time

-  warm food has been placed in the compartment.

Содержание ZI 9454A




















Отзывы: