Zanussi ZI 912 KA, Инструкция пользователя

Страница: 6 / 24

Normal Operating Sounds
• You may hear faint gurgling or bubbling sounds
when the refrigerant is pumped through the coils
or tubing at the rear, to the cooling
plate/evaporator.
• When the compressor is on, the refrigerant is
being pumped round, and you will hear a whirring
sound or pulsating noise from the compressor.
• A thermostat controls the compressor, and you
will hear a faint ’click’ when the thermostat cuts in
and out.
Use of the freezer compartment
Temperature control
The temperature within the freezer is controlled by
the thermostat situated at the top of the cabinet.
The temperature of this compartment may be
regulated by rotating the knob (B), and may vary
between more or less -15°C and -24°C.
When the knob is rotated, the display flashes and
indicates the set temperature. After having set the
desired temperature, if the knob is not rotated within
5 seconds, the temperature of the freezer
compartment will be indicated.
To operate the freezer proceed as follows:
Turn the thermostat control beyond the «
●
» position.
When you first start the freezer, we suggest that you
turn the thermostat control to a medium setting.
However, if the appliance is working in unfavourable
room conditions such as
- poor ventilation,
- high temperature,
- frequent door openings,
it may be necessary to select a more suitable
setting.
We suggest setting the knob to the middle position to
obtain an internal temperature of approximately
-18°C, which guarantees proper freezing and
conservation of the frozen foods.
6
wrap in polythene bags and place on the glass shelf
above the salad drawers.
Meat can only be stored safely in this way for
one or two days at the most.
Fruit & vegetables: these should be thoroughly
cleaned and placed in the salad drawers.
Butter & cheese: these should be placed in special
airtight containers or wrapped in aluminium foil or
polythene bags to exclude as much air as possible.
Milk bottles: these should have a cap and should be
stored in the bottle rack on the door.
Freezing fresh food
The freezer compartment is suitable for long term
storage of commercially frozen food, and for freezing
fresh food.
The maximum quantity of foods to freeze in 24 hours is
shown on the serial number plate.
Place the foods you want to freeze on the shelf of the
freezer compartment, as this is the coldest point.
To freeze fresh foods, you will need to activate the fast
freeze function. Press button E (several times if
necessary) until the corresponding icon appears
After a pre-cooling period of 24 hours, place the foods
in the freezer.
The freezing process takes 24 hours. During this
period do not put other foods in the freezer.
This function stops automatically after 54 hours.
Put the foods to be frozen in the compartments of
the freezer, as per the diagram.
The function can be de-activated at any time by
pressing button E (see paragraph "Activation of
Functions").
Distribute the frozen food packages in the other
compartments, so that the top compartments can be
used for a further freezing operation.
- The food to be frozen must be fresh and of the
best quality.
- Do not allow fresh food to touch food which is
already frozen.
- During the freezing process, ensure that the
freezer door remains closed.
X
19
Place guide (Ha) on the inside part of the furniture
door, up and down as shown in the figure and mark
the position of external holes. After having drilled
holes, fix the guide with the screws supplied.
21 mm
21 mm
ca. 50 mm
90°
90°
ca. 50 mm
Fix cover (Hc) on guide (Ha) until it clips into place
PR33
Hc
Ha
PR167
Ha
Hb
8mm
Open the appliance door and the furniture door at
90°. Insert the small square (Hb) into guide (Ha).
Put together the appliance door and the furniture
door and mark the holes as indicated in the figure.
PR168
Hb
Place the small square on the guide again and fix it
with the screws supplied.
Should the lining up of the furniture door be
necessary, use the clearance of slots.
At the end of operations, it is necessary to check if
the door of the furniture closes properly.
Ha
8mm
K
Remove the brackets and mark a distance of 8 mm
from the outer edge of the door where the nail must
be fitted (K).