5
The Safety Thermostat
This oven is provided with a safety thermostat. In case of
malfunctioning of the main thermostat, and consequent
over-heating, the safety device will stop the power supply
to the appliance. If this happens, call your local Service
Centre. Under no circumstances should you attempt to
repair the appliance yourself.
The Cooling Fan for the Controls
This oven is provided with a cooling fan, meant to keep the
front panel, the knobs and the oven door handle cool. This
fan may run on after the oven or grill is switched off, until
a normal temperature is reached.
Before cooking for the first time, carefully wash
the
oven accessories
.
Mod. ZHQ 861: The oven will work only if the
time of day has been set (please read the
relevant instructions).
Once the oven has been installed:
a) set the thermostat knob to MAX (250);
b) switch the oven function control knob to conventional
cooking ( );
c) allow the oven to run empty for approximately 45
minutes;
d) open a window for ventilation.
During this time, an unpleasant odour may be emitted.
This is absolutely
normal
, and is caused by residues of
manufacturing.
Repeat this operation for the grill and fan cooking function.
Once this operation is carried out, let the oven cool down,
then clean the oven cavity with a soft cloth soaked in warm
soapy water.
FO 2161
Fig. 7
To open the oven door, always catch the
handle in its central part (Fig. 7).
When the oven is first installed
Hotplate control knobs
The Control Knobs for the hotplates (Fig. 6) can be found
on the oven control panel. The energy regulator of the
hotplates can be set by means of a 10-position control
knob:
0
= Off
1
= Minimum
9
= Maximum
The intermediate positions give an increasing heating
power.
Carefully supervise cookings with oil or fats,
since these types of food can result in a fire,
when over-heated.
0
9
8
7
6
5
4
3
2
1
FO 2591
Fig. 6
