background image

16

GB

MAINTENANCE

Grease filters

CLEANING METAL SELF-SUPPORTING

 

GREASE FILTERS

CLEANING MULTILAYER METAL GREASE FILTERS

REPLACING SYNTHETIC GREASE FILTER

• The filters must be cleaned every two months of 

operation, or more frequently with heavy usage, 
and can be washed in a dishwasher.

• Remove the filters one at a time, after 

disconnecting the relative fastening elements.

• Wash the filters, taking care not to bend them. 

Allow them to dry before refitting.

• When refitting the filters, make sure that the 

handle is visible on the outside.

• The filters must be cleaned every two months of 

operation, or more frequently with heavy usage, 
and can be washed in a dishwasher.

• Release the filter retaining grill using the lateral 

sliding handles.

• Remove the filter retaining clips.
• Remove and wash the filters. Allow them to dry 

before refitting.

• Replace the filters on the grill, fix them in 

position using the filter retaining clips and close 
the filter retaining grill.

• The filter is not washable and cannot be 

regenerated, and must be replaced approximately 
every two months of use, or more frequently with 
heavy usage.

• Release the filter holder frame using the lateral 

sliding handles.

• Remove the fIlter retaining clips.
• Replace the saturated synthetic filter.
• Fix the new synthetic filter using the retaining 

clips and close the filter holder frame.

Содержание ZHP 631











Отзывы: