Zanussi ZHC 950, Инструкция пользователя

Страница: 11 / 20

1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890
INSTALLATION INSTRUCTIONS
It is dangerous to alter the specifications or attempt to modify this product in any way.
Technical information
DIMENSIONS HEIGHT OF CANOPY: (incl glass visor) 52mm
HEIGHT OF CHIMNEY: (UPPER SECTION) 465mm
(LOWER SECTION) 740mm
WIDTH OF CANOPY: (incl glass visor) 898mm
DEPTH OF CANOPY: (incl glass visor) 520mm
ELECTRICAL SUPPLY VOLTAGE: (~50Hz) 220-240V
POWER CONSUMPTION: 230W
FAN MOTOR: 150W
LAMPS: (2 x40W) 80W
SUITABLE FOR -
INSTALLATION ABOVE:
ELECTRIC HOB: 7KW (MAX)
GAS HOB: 10KW (MAX)
SLOT-IN ELECTRIC COOKER: 12.4KW (MAX)
SLOT-IN GAS COOKER: 13.5KW (MAX)
THIS APPLIANCE MUST BE EARTHED
Electrical Requirements
Any permanent electrical installation must
comply with the latest I.E.E. Regulations and
local Electricity Board regulations. For your own
safety this should be undertaken by a qualified
electrician e.g. your local Electricity Board, or a
contractor who is on the roll of the National
Inspection Council for Electrical Installation
Contracting (NICEIC).
Electrical Connection
Before connecting to the mains supply ensure
that the mains voltage corresponds to the
voltage on the rating plate inside the cooker
hood.
Note: CE Marking certifies that this appliance complies with the
requirements laid down in EEC directive 89:336 (Electromagnetic
compatibility) and subsequent modifications and Low Votage directive
72/23/E.
This appliance is fitted with a 3 core mains
cable and must be permanently connected to
the electricity supply via a double-pole switch
having 3mm minimum contact gap on each
pole. A Switched Fuse Connection Unit to
BS.1363 Part 4, fitted with a 3 Amp fuse, is a
recommended mains supply connection
accessory to ensure compliance with the
Safety Requirements applicable to fixed
wiring instructions.
This appliance conforms to BS.800:1988 and
EEC Directive No. 78 308 regarding
suppression of radio and television
interference.
9